GW Instek GDS-1062A - Save; File Type;Source;Destination

SAVE/RECALL
95
4. Press Function repeatedly to
select Save Image or Save All.
5. To invert the color in the
display image, press Ink
Saver. This turns Ink Saver
on or off.
6. Press Mem Leng repeatedly
to select SD Normal or SD
1M/2M. SD Normal and SD
1M/2M sets the waveforms
to a 4k and 1M/2M memory
length when saving,
respectively.
1M memory length is
available when both CH1
and CH2 are active; 2M
memory length is available
when a single channel is
active only.
7. Press the Hardcopy key.
The file or folder will be
saved to the root directory
of the SD card.
Hardcop
y
GDS-1000A Series User Manual
96
Save
This section describes how to save data using the Save/Recall menu.
File type/source/destination
Item Source Destination
Panel setup
(xxxx.set)
 Panel settings  Internal memory: S1 ~
S15
 External memory: SD
card
Waveform data
(xxxx.csv)
 Channel 1, 2
 Math operation
result
 Reference
waveform A, B
 Internal memory: W1 ~
W15
 Reference waveform A, B
 External memory: SD
card
Display image
(xxxx.bmp)
 Display image  External memory: SD
card
Save All
 Display image
(xxxx.bmp)
 Waveform data
(xxxx.csv)
 Panel settings
(xxxx.set)
 External memory: SD
card
SD Card
restriction
The GDS-1000A series accepts the following SD
cards:
Type: SD, SDHC
Class: 2,4,6
Size: Up to 32GB (SDHC)
Format: FAT or FAT32