GW Instek GDS-1062A - Print; Print (Hardcopy)

PRINT
109
PRINT
The GDS-1000A is able to print screen images
directly to a PictBridge compatible printer. The
printed images can use the “Ink Saver” feature to
print onto a white rather than a black background
to reduce the amount of ink used. Note that
printing and remote control cannot be used at the
same time.
Print (Hardcopy)
Background
The Hardcopy key works as a
shortcut for printing screen
images directly to a printer or
to save display images,
waveform data, and panel
settings onto an SD card.
Hardcop
y
The Hardcopy key can be configured into three
types of operations: save image, save all (image,
waveform, setup) and printer.
Procedure
1. Ensure the USB Port has
been configured properly
and that the USB cable is
connected.
Page 83.
2. Press the Utility key.
Utility
3. Press Hardcopy Menu.
GDS-1000A Series User Manual
110
4. Press Function repeatedly to
select Printer.
5. To invert the color in the
display image, press Ink
Saver. This turns Ink Saver
on or off.
6. Press the Hardcopy key.
The current screen image
will be printed to the
printer.
The Hardcopy key can be
used to print to a printer
each time until it is
configured otherwise.
Hardcop
y
Note: If the error message “Printer Not Ready” is
displayed, please check to ensure the printer is
turned on, the USB cable is properly connected,
and that the printer is ready.