GW Instek GDS-1062A - Automatically Measuring the Input Signals

MEASUREMENT
49
FRF
Time between:
Source 1 first rising edge and
Source 2 first falling edge
FFR
Time between:
Source 1 first falling edge and
Source 2 first rising edge
FFF
Time between:
Source 1 first falling edge and
Source 2 first falling edge
LRR
Time between:
Source 1 first rising edge and
Source 2 last rising edge
LRF
Time between:
Source 1 first rising edge and
Source 2 last falling edge
LFR
Time between:
Source 1 first falling edge and
Source 2 last rising edge
LFF
Time between:
Source 1 first falling edge and
Source 2 last falling edge
Automatically measuring the input signals
Viewing the
measurement
result
1. Press the Measure key.
Measure
2. The measurement results appear on the menu
bar, constantly updated. 5 measurement slots
(F1 to F5) can be customized.
GDS-1000A Series User Manual
50
Editing a
measurement
item
3. Press the corresponding
menu key (F1~F5) to select
the measurement slot to be
edited.
4. The editing menu appears
Change
measurement
item
5. Use the Variable knob to
select a different
measurement item.
VARIABL
E
Change
measurement
source
6. Press F1 repeatedly to
change Source1 from CH1
to CH2 or MATH.
Range
CH1, 2, Math