GW Instek GDS-1062A - Saving the Display Image; Saving All (Panel Settings, Display Image, Waveform)

SAVE/RECALL
99
SD Normal
Save to the SD card with a 4k
waveform memory length.
SD 1M
Save to the SD card with a 1M
waveform memory length. For 2
channel operation only.
SD 2M
Save to the SD card with a 2M
waveform memory length. For
single channel operation only.
Ref
Internal reference waveform, A/B
6. Press Save to confirm
saving. When completed, a
message appears at the
bottom of the display.
Note
The file will not be saved if the
power is turned off or the SD card is
disconnected before completion.
File utilities
To edit SD card contents
(create/ delete/ rename files
and folders), press File Utilities.
For details, see page91.
Saving the display image
Background
Saving the display image can be used as a screen
capture or it can be used as a reference waveform.
Procedure
1. (For saving to an external
SD card) Insert the card into
the slot.
2. Press the Save/Recall key
twice to access the Save
menu.
Save/Recal
l
Save/Recal
l
GDS-1000A Series User Manual
100
3. Press Save Image.
4. Press Ink Saver repeatedly to
invert the background color
(on) or not (off).
5. Press Destination.
SD card
External card, no practical
limitation on the amount of files.
When saved, the image file will be
placed in the root directory.
6. Press Save to confirm
saving. When completed, a
message appears at the
bottom of the display.
Note
The file will not be saved if the
power is turned off or the SD card is
disconnected before completion.
File utilities
To edit SD card contents
(create/ delete/ rename files
and folders), press File Utilities.
For details, see page91.
Saving all (panel settings, display image, waveform)
Procedure
1. (For saving to an external
SD card) Insert the card into
the slot.