GW Instek GDS-1062A - Adjusting the Display Contrast; Selecting the Display Grid; Horizontal View; Moving the Waveform Position Horizontally

CONFIGURATION
65
Example Accumulation off
Accumulation on
Adjusting the display contrast
Procedure
1. Press the Display key.
Display
2. Press Contrast.
3. Turn the Variable knob left
to lower the contrast (dark
display) or right to raise the
contrast (bright display).
VARIABL
E
Selecting the display grid
Procedure
1. Press the Display key.
Display
2. Press the grid icon
repeatedly to select the grid.
Parameters
Shows the full grid.
Shows the outer frame and X/Y axis.
Shows only the outer frame.
GDS-1000A Series User Manual
66
Horizontal View
The Horizontal view section describes how to configure the
horizontal scale, position, waveform update mode, window zoom,
and X-Y mode.
Moving the waveform position horizontally
Procedure
The horizontal position knob
moves the waveform left or
right. The position indicator at
the top of the display shows the
center and current position.
Center position
Moving right
Selecting the horizontal scale
Select horizontal
scale
To select the timebase (scale),
turn the TIME/DIV knob; left
(slow) or right (fast).
TIME/DIV
Range 1ns/Div ~ 50s/Div, 1-2.5-5-10 increment
The timebase indicator at the bottom of the display
updates the current horizontal scale.