GW Instek GDS-1062A - Recall; File Type;Source;Destination; Recalling the Default Panel Settings

SAVE/RECALL
103
Recall
File type/source/destination
Item Source Destination
Default panel
setup
 Factory installed
setting
 Current front panel
Reference
waveform
 Internal memory: A, B  Current front panel
Panel setup
(DSxxxx.set)
 Internal memory: S1 ~
S15
 External memory: SD
card
 Current front panel
Waveform data
(DSxxxx.csv)
 Internal memory: W1 ~
W15
 External memory: SD
card
 Reference waveform
A, B
SD Card
restriction
The GDS-1000A series accepts the following SD
cards:
Type: SD, SDHC
Class: 2,4,6
Size: Up to 32GB (SDHC)
Format: FAT or FAT32
GDS-1000A Series User Manual
104
Recalling the default panel settings
Procedure
1. Press the Save/Recall key.
Save/Recal
l
2. Press Default Setup. The
factory installed setting will
be recalled.
Setting contents
The following is the default panel setting contents.
Acquisition
Mode: Normal
Channel
Coupling: DC Invert: Off
BW limit: Off voltage: x1
Cursor
Source: CH1 Horizontal: None
Vertical: None
Display
Type: Vectors Accumulate: Off
Graticule:
Horizontal
Scale: 2.5us/Div Mode: Main Timebase
Math
Type: + (Add) Channel: CH1+CH2
Position: 0.00 Div Unit/Div: 2V
Measure
Item: Vpp, Vavg, Frequency, Duty cycle, Rise Time
Trigger
Type: Edge Source: Channel1
Mode: Auto Slope:
Coupling: DC Rejection: Off
Noise Rejection: Off
Utility
SaveImage, InkSaver Off