SAVE/RECALL
101
2. Press the Save/Recall key
twice to access the Save
menu.
Save/Recal
3. Press Save All. The following
information will be saved.
Setup file
(Axxxx.set)
Two types of setups are saved:
the current panel setting and
the last internally saved
settings (one of S1 ~ S15).
Display image
(Axxxx.bmp)
The current display image in
the bitmap format.
Waveform data
(Axxxx.csv)
Two types of waveform data
are saved: the currently active
channel data and the last
internally saved data (one of
W1 ~ W15).
4. Press Ink Saver repeatedly to
invert the background color
(on) or not (off) for the
display image.
SD Normal
Save to the SD card with a 4k
waveform memory length.
SD 1M
Save to the SD card with a 1M
waveform memory length. For 2
channel operation only.
SD 2M
Save to the SD card with a 2M
waveform memory length. For
single channel operation only.
GDS-1000A Series User Manual
102
6. Press Save to confirm
saving. When completed, a
message appears at the
bottom of the display.
Note
The file will not be saved if the
power is turned off or the SD card is
disconnected before completion.
7. Together with the current setup/waveform/
image, the last saved waveform file (one from
W1 ~ W15) and setup file (one from S1 ~ S15)
are also included in the folder.
File utilities
To edit SD card contents
(create/ delete/ rename files
and folders), press File Utilities.
For details, see page91.
To Next Page
Loading...
