GW Instek GDS-1062A - System Settings; Viewing the System Information; Selecting the Language

CONFIGURATION
85
5. Run this query command via the terminal
application.
*idn?
This command should return the manufacturer,
model number, serial number, and firmware
version in the following format.
GW, GDS-1152A, XXXXXXX, V1.00
6. Configuring the command interface is
complete. Refer to the programming manual for
the remote commands and other details.
GDS-1000A Series User Manual
86
System Settings
The system settings show the oscilloscope’s system information and
allow changing the language.
Viewing the system information
Procedure
1. Press the Utility key.
Utility
2. Press System Info. The upper
half of the display shows the
following information.
 Manufacturer  Model
 Serial number  Firmware version
 Web address
3. Press any other key to go
back to the waveform
display mode.
Selecting the language
Parameter
Language selection differs according to the region
to which the oscilloscope is shipped.
 English  Chinese (traditional)
 Chinese (simplified)  Others
Procedure
1. Press the Utility key.
Utility
2. Press Language repeatedly to
select the language.