GW Instek GDS-1062A - Page 8

GETTING STARTED
15
Trigger force key
FORC
E
Acquires the input signal once
regardless of the trigger condition
at the time (page82).
Horizontal menu
key
MENU
Configures the horizontal view
(page66).
Horizontal
position knob
Moves the waveform horizontally
(page66).
TIME/DIV knob
TIME/DIV
Selects the horizontal scale
(page66).
Vertical position
knob
Moves the waveform vertically
(page70).
CH1/CH2 key
CH 1
Configures the vertical scale and
coupling mode for each channel
(page70).
VOLTS/DIV knob
VOLTS/DIV
Selects the vertical scale (page70).
Input terminal
CH1
Accepts input signals: 1MΩ±2%
input impedance, BNC terminal.
Ground terminal
Accepts the DUT ground lead to
achieve a common ground.
MATH key
MAT
H
Performs math operations
(page55).
SD card port
Facilitates transferring waveform
data, display images, and panel
settings (page87).
Probe
compensation
output
Outputs a 2Vp-p, square signal for
compensating the probe (page112)
or demonstration.
GDS-1000A Series User Manual
16
External trigger
input
EXT TRI
G
Accepts an external trigger signal
(page75).
Power switch
Powers the oscilloscope on or off.