GW Instek GPP-3060 - Page 135

REMOTE CONTROL
135
<Boolean> : 0= off, 1=on
Example
OUT1
Turns on the output.
Command
ROUTe:TERMinals {FRONt/REAR}
Function
Set the front or rear terminal output.
Example
ROUTe:TERMinals REAR
Set output from rear terminal.
Command
ROUTe:TERMinals?
Function
Query front or rear terminal output.
Return
FRONt: Output from front terminal.
REAR: Output from rear terminal.
Example
ROUTe:TERMinals?
Command
:OUTPut[1|2|3]:OVP:STATe <b>
Function
Turns OVP protection on/off.
Description
<b>
0/OFF:Turns OVP off.
1/ON:Turns OVP on.
Example
:OUTPut2:OVP:STATe ON
Turn on OVP on CH2.
Command
:OUTPut[1|2|3]:OVP:STATe?
Function
Queries the status of the OVP function.
Return
0/OFF: OVP function is off.
1/ON: OVP function is on.