GW Instek GPP-3060 - Page 138

GPP-3060/6030 User Manual
138
Example
:OUTPut2:OCP 1.5
Sets the OCP voltage to 1.5A for CH2.
Note
The USB port, OCP value can not be set.
Command
:OUTPut[1|2|3]:OCP?
Function
Queries the OCP current level.
Example
:OUTPut2:OCP?
Queries the OCP current level on CH2.
Note
The USB port , CH3 OCP query value is 3.10A.