GW Instek GPP-3060 - Page 137

REMOTE CONTROL
137
Command
:OUTPut[1|2|3]:OCP:STATe <b>
Function
Turns OCP protection on/off.
Description
<b>
0/OFF:Turns OCP off.
1/ON:Turns OCP on.
Example
:OUTPut2:OCP:STATe ON
Turn on OCP on CH2.
Command
:OUTPut[1|2|3]:OCP:STATe?
Function
Queries the status of the OCP function.
Return
0/OFF: OCP function is off.
1/ON: OCP function is on.
Example
:OUTPut2:OCP:STATe?
Returns the status of the OCP function on CH2.
Command
:OUTPut[1|2|3]:OCP:TRIGer?
Function
Query whether the OCP protection function has
been triggered.
Return
0/OFF: The channel OCP protection is not
triggered.
1/ON: The channel OCP protection has been
triggered.
Example
:OUTPut2:OCP:TRIGer?
Return whether the OCP protection function of
channel 2 has been triggered.
Command
:OUTPut[1|2]:OCP <value>
Function
Sets the OCP level.
Description
<value>
Refer to the specification sheet on
page 200 for value.