GW Instek GPP-3060 - Page 15

OVERVIEW
15
Display Change
Function
It provides up to 6 display types, each of which
can be well selected via setting. For details, see
page 33.
Output Waveform
Function
Under Source mode, user can customize a
certain V/I sequential waveform output. Under
Load mode, it is programmable for dynamic
load (below 1Hz). For details, see page 54.
Front and rear
output function
For the convenience of customers, GPP can be
operated by the panel menu or remote
command, so that it can be output on the front
and rear panels, please refer to page 31.
Remote Control
To meet the various needs of customers, the
GPP is designed for USB, GPIB ,LAN and RS-
232 remote control. For details, see page 101.
Additional
Function
Control signal of external switch is reserved for
user. For details, see page 85.