GW Instek GPP-3060 - Page 162

GPP-3060/6030 User Manual
162
Example
:RECOrder2:GROUPs?
Returns the group number of CH2 recorder.
Command
:RECOrder[1|2]:ENABle {ON|OFF}
Function
Sets the channel recorder ON or OFF.
Example
:RECOrder2:ENABle ON
Enables CH2 recorder.
Command
:RECOrder[1|2]:ENABle?
Function
Queries the state of channel recorder.
Return
ON: Recorder is Enable.
OFF: Recorder is Disable.
Example
:RECOrder2:ENABle?
Returns the state of CH2 recorder, ON or OFF.
Command
:SEQUence[1|2]:CYCLEs {N|I}[,<value>]
Function
Sets the cycle number of sequence.
Description
{N|I} Sets cycle number as infinite (I) or specified
value (N, <value>).
Example
:SEQUence2:CYCLEs N,20
Sets the cycle number of sequence as 20.
Command
:SEQUence[1|2]:CYCLEs?
Function
Queries the cycle number of the sequence.
Example
:SEQUence2:CYCLEs?
Queries the cycle number of the sequence,
Returns to I or N, <value>.