GW Instek GPP-3060 - Page 40

GPP-3060/6030 User Manual
40
F2(mV) to confirm:
Input 6.5V:
(b) Step input:
Press the left or right
arrow buttons to
select high and low
level that require fine
tune (underline
below the
corresponding
number value), and
scroll the scroll
wheel to increase or
decrease setting
value.
OCP
Press F3 key to enter
the Protect menu.
Press F3 key to open
OCP function. OCP
display will change
from gray to white
font.
Press the F2 key to
enter OCP setting
area on LCD, which
will be thus activated
(red font color with
the underline
indicator).
(a) Input digit with number pad (0-