GW Instek GPP-3060 - Page 41

BASIC OPERATION
41
9,.) and press unit key F1(A) or
F2(mA) to confirm:
Input 2.5A:
CAUTION:
There’s no proper sequence between turning
on OVP/OCP functions and setting
OVP/OCP value.
Either step input or number pad input is
applicable for setting parameter value.
Operation
ON/OFF
Output ON/OFF control.
Output is open when output
lights up; whilst output is off
when output lights out.
All ON/OFF
1. When the output state of all
channels is identical, press All
ON/OFF to perform the
opposite operation.
2. When the output of all
channels is inconsistent, press
All ON/OFF will close the
open channel of the output.
State
description
CV/CC
Constant
voltage displays
in green CV,
while constant
current displays
in red CC.
OVP/OCP
OVP/OCP displays in white
when OVP is not in activation.