GW Instek PEL-3111 - File Types

OPERATION
99
active preset setting.
For normal and fast sequences however, files can
be saved or recalled directly to/from USB
memory.
File Types
Memory Data
Memory data contains general settings and is used
for creating programs. Memory Data contains the
operating mode, range, response and Go/NoGo
settings. Memory data can be stored both
internally and externally to USB. Preset data and
Memory data store the same contents.
Internal Format
M001 - M256
External Format
model no_file no.M
example: 3021(H)_01.M
Setup Data
Setup data contains all general configuration
settings, protection settings, program and program
chain settings, as well as parallel configuration
settings.
Internal Format
1 - 100
External Format
model no_file no.S
example: 3021(H)_00.S
Preset Data
Preset Data contains the same settings as the
Memory Data. Preset Data contains the operating
mode, range, response and Go-NoGo settings.
Internal Format
P0 - P9
External Format
model no_file no.P
example: 3021(H)_00.P
NSeq Data
NSeq Data contains the Normal Sequence settings.
Internal Format
None
External Format
model no_file no.N
example: 3021(H)_00.N
FSeq Data
FSeq Data contains the Fast Sequence settings.