GW Instek PEL-3111 - Alarm Tone Settings; Display Settings; Contrast and Brightness

PEL-3000(H) User Manual
92
Alarm Tone Settings
Description
The alarm tone for the unit can be turned on or off
in the utility menu. The alarm tone can be set
separately for the protection settings (OCP, OPP,
UVP, OVP), Go-NoGo testing or for when the unit
is operating in an unregulated state (see page 88).
Operation
1. Press
Shift
+
Utility
Help
> Other[F5].
2. Set the alarm tone settings on or off.
 The alarm tone settings ignore the Speaker
setting.
Alarm Tone:
UnReg Tone:
Go_NoGo Tone:
ON, OFF
ON, OFF
ON, OFF
Display Settings
Contrast and Brightness
Description
Sets the contrast level.
Operation
1. Press
Shift
+
Utility
Help
> Other[F5].
2. Set the Contrast and Brightness settings.
Range:
Contrast: 3 - 13 (low - high)
Brightness: 50 - 90 (low - high)