GW Instek PEL-3111 - Basic Configuration

OPERATION
63
Operation
1. Press
Main
> Configure[F5] > Other[F2] and
set the Short Safety.
 When set to OFF, the load can be shorted at
anytime.
 When set to ON, the load can only be shorted
when the load is already on.
Short (Safety):
OFF, ON
Note
The Short Safety setting will be grayed out if Short
Function is set to OFF. See page 63 for details.
Short Key Configuration
Description
The Short key can be configured to Toggle or Hold.
By Default the Short key is set to Toggle.
 Toggle: Pressing the Short key will toggle the
shorting function on or off.
 Hold: Holding the short key will short the load.
Operation
1. Press
Main
> Configure[F5] > Other[F2] and
set the Short Key setting.
Range:
Toggle, Hold
Note
The Short Key setting will be grayed out if Short
Function is set to OFF. See page 63 for details.