GW Instek PEL-3111 - Data Edit Configuration

FUNCTION MENU
141
 Go to Data Edit to edit the steps used in the
Fast Sequence. Page 141.
 Go to Running a Fast Sequence to run the fast
sequence. Page 143.
Data Edit Configuration
Data Edit Display
Previous
Menu
LOADRS232
01/Oct/2017
Data Edit for Fast Sequences
OFF
0005
Insert
Point
Save
Step: 0001
TRIG OUT:
Value: 0.000 mA
/
Delete
Point
Step settings
Fill
Active step number
Total number of steps
RPT:0004
FILL Display
Save
Previous
Menu
End_Step 0010
Start_Step 0001
LOADRS232
01/Oct/2018
End_Value:
Start_Value:
10.002
0.000
Fill Edit for Fast Sequences
mA
mA
Operation
1. Press
FUNC
> Fast Sequence[F3] > Edit
Sequence[F2] to enter the Data Edit
configuration menu.
2. Press Insert Point[F1] to add a step to the