GW Instek PEL-3111 - Accessories

GETTING STARTED
9
PEL-3000(H) Series Introduction
The PEL-3000(H) Series is a family of high performance DC
electronic loads positioned to test a wide range of different power
sources. The DC electronic loads are fully programmable to
simulate anything from basic static loads to complex dynamic loads.
With the ability to operate independently or in parallel, the PEL-
3000(H) Series is extremely robust and capable of molding to any
test environment.
Please note that throughout this manual the term “PEL-3000(H)”
refers to any one of the models in the series lineup, unless
specifically stated otherwise.
Model Line Up
There are a total of 3 DC electronic load models and 1 booster pack
model.
Model
Voltage (DC)
Current
Power
PEL-3021(H)
0V-150V(0V-800V)
35A(8.75A)
175W
PEL-3041(H)
0V-150V(0V-800V)
70A(17.5A)
350W
PEL-3111(H)
0V-150V(0V-800V)
210A(52.5A)
1050W
Booster Model
Voltage (DC)
Current
Power
PEL-3211(H)
0V-150V(0V-800V)
420A(105A)
2100W