GW Instek PEL-3111 - Test Automation

FUNCTION MENU
143
 Go to Timing Edit for Fast Sequences to edit the
sequence. Page 140.
 Go to Running a Fast Sequence to run the fast
sequence. Page 143.
Running a Fast Sequence
Description
Unlike a normal static or dynamic load, a Fast
Sequence load is turned on by pressing the Shift
and Load keys.
Operation
1. Press
FUNC
> Fast Sequence[F3].
2. Turn fast sequence mode on by setting
F. Seq.[F1] to On.

FSEQ
will appear at the top of the display when
F. Seq. is On.
3. Turn the load on by pressing
Shift Load
On/
Off
.
 The
Load
On/
Off
key will turn orange when the
load is “on”.
 The load can be turned off again by pressing
the
Load
On/
Off
key.
 The fast sequence/chain starts immediately.
 The
FSEQ
icon turns orange when the load is
turned on.
4. When a fast sequence is running, the screen
displays which step and loop is currently
active.
 “Sequence Complete” will be shown on the
display at the end of the sequence.