GW Instek PEL-3111 - Using the Terminal Cover (PEL-013)

PEL-3000(H) User Manual
38
5
Using the Terminal Cover (PEL-013)
Description
The flexible rear panel terminal cover should be
used when the load wiring becomes too thick to be
used with the PEL-011 terminal cover. This is
especially true when using the load generators in
parallel. Like the PEL-013 terminal cover, the PEL-
011 is used to prevent electric shock. The rear
panel terminal covers should always be used
when connecting a load to the rear panel
terminals.
Caution
Ensure the power is off before making any
connections to the booster pack.
1. Wrap the insulation sheets around the
terminals and load cables, as shown below.
Make sure the terminals and any exposed
wires are covered by the sheets.
Insulation sheet
1
2. Secure the insulation sheets using the supplied
velcro fasteners. 2 fasteners should be used for
each sheet.