GW Instek PEL-3111 - Page 172

PEL-3000(H) User Manual
170
CR Mode
Input conductance =
rated conductance × (external voltage/10)
Input
Conductance
External
Voltage
Rated
Conductance
0V 10V
CV Mode
Cx+CV Mode
Input voltage = rated voltage × (external
voltage/10)
Input
Voltage
External
Voltage
Rated
Voltage
0V 10V
CP Mode
Input power = rated power × (external voltage/10)
Input Power
External
Voltage
Rated
Power
0V 10V
Operation
1. Turn the power off from the PEL-3000(H) and
from the load.
2. Connect the external voltage across pins 1 and 3
of the J1 connector.
3. Turn the power on the PEL-3000(H).
4. Set the operating mode and range.
 See page 53 for CC mode.