GW Instek PEL-3111 - Page 48

PEL-3000(H) User Manual
46
Toggle Parameter
or State
Mode
CC
Function/Item
Parameter or State
This type of soft-menu icon has the function/item
on the top of the label and the selected setting or
mode on the bottom of the label.
Repeatedly press the associated function key (F1-
F5) to cycle through each setting. For example,
repeatedly pressing the Mode soft-menu key will
cycle through the CC, CR, CV and CP modes.
Mode
CR
Mode
CC
Mode
CV
Mode
CP
For some parameters, a popup window will also
appear. Selection of the setting is the same.
Repeatedly pressing the relevant function key (F1-
F5) will cycle through each setting. The selection
on the popup window will also be reflected on the
label.
Mode
CC
I Range
H 8.75A
V Range
H800V
Function
Static
Configure
0.00
V
0.0000A
0.00W
SlewRate 140.00
CC B Value 0.0000
CC A Value 0.0000
LOADRS232
A Value
Fine
01/Oct/2017
mA/us
A
A
LOW
Middle
High
87.5mA
0.875A
8.750A
label
Popup window
Prameter selection
Parameter Input
The scroll wheel, Enter key and number pad can
be used to edit parameter values.