Table 1 Registration information
Parameter Value
FCC identification number (FCC ID) VICPAT700TOC
IC 6149A-PT700TOC
For Japan
Frequency 13.56 MHz to ±7 kHz
RF output power <180 mW
Product overview
D A N G E R
Chemical or biological hazards. If this instrument is used to monitor a treatment process and/or
chemical feed system for which there are regulatory limits and monitoring requirements related to
public health, public safety, food or beverage manufacture or processing, it is the responsibility of the
user of this instrument to know and abide by any applicable regulation and to have sufficient and
appropriate mechanisms in place for compliance with applicable regulations in the event of malfunction
of the instrument.
This analyzer uses UV light to oxidize water samples for TOC analysis in pure and ultra-pure water
process applications. The analyzer is capable of compliance to 21 CFR Part 11 with password
protection and an audit trail of all user actions.
For power and data collection, the analyzer connects to the facility systems through quick-connect
wiring connections. Some analyzers have conduit openings instead of quick-connect wiring
connections with internal connector blocks for conduit wiring connections.
The analyzer has an OASIS bottle bay to measure individual grab samples or do a
calibration/validation. Bottle information is read automatically with the radio frequency identification
device (RFID) wireless system and RFID tags on the bottles
*
.
Product components
Make sure that all components have been received. Refer to Figure 1. If any items are missing or
damaged, contact the manufacturer or a sales representative immediately.
*
Not all models include the RFID wireless system
8 English
To Next Page
Loading...
