Figure 1 Instrument components
1 Wall mount bracket 5 Power cord 9 Connector, I/O, 5-pin (3x)
2 PAT700 6 Connector, I/O, 6-pin (1x) 10 Screwdriver, 2-mm wide blade
3 Tubing, 10 ft 7 USB flash drive 11 Stylus for touchscreen
4 Tubing, 5 ft 8 Graduated cylinder, 50-mL 12 Hex wrench, T-handle
Installation
Installation guidelines
D A N G E R
Fire hazard. This product is not designed for use with flammable liquids.
D A N G E R
Electrocution hazard. If this equipment is used outdoors or in potentially wet locations, a Ground Fault
Circuit Interrupt (GFCI/GFI) device must be used for connecting the equipment to its main power
source.
W A R N I N G
Electrical shock hazard. Externally connected equipment must have an applicable country safety
standard assessment.
W A R N I N G
Multiple hazards. Only qualified personnel must conduct the tasks described in this section of the
document.
English 9
To Next Page
Loading...
