This instruction manual has been written for the following:
PCA340 – Chlorine, pH, temperature analyzer with 2 analog outputs.
PCA330 – Chlorine, pH, temperature, ORP analyzer with 1 analog output.
PCA320 – Chlorine, pH, temperature analyzer with 1 analog output.
PCA310 – Chlorine analyzer with 1 analog output.
The analyzers have features such as: automatic chlorine measurement, pH, temperature and ORP
measurement, chlorine and pH dosing regulator, selectable sampling periods, alarm system, data link
through GSM network, user friendly interface, serial communication through RS485, recorder output,
4-20 mA dosing output, Nema 4X enclosure.
The ordering code for chlorine analyzers is:
PCA3a0-b
a = 1 - Chlorine analyzer with 1 analog output
2 - Chlorine, pH, temperature analyzer with 1 analog output
3 - Chlorine, pH, temperature, ORP analyzer with 1 analog output
4 - Chlorine, pH, temperature analyzer with 2 analog outputs
b = 1 - 115 VAC 50-60 Hz
2 - 230 VAC 50-60 Hz
Note: If the instrument is set for free chlorine analysis, the software will report at startup
Free Chlorine and if it is set for total chlorine, the software will report at startup Total Chlorine.
Thank you for choosing a Hanna Instruments product.
Please read this instruction manual carefully before using the instrument.
This manual will provide you with the necessary information for correct use of the
instrument, as well as a precise idea of its versatility.
If you need additional technical information, do not hesitate to e-mail us at
tech@hannainst.com or view our worldwide contact list at www.hannainst.com.
All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of
the copyright owner, Hanna Instruments Inc., Woonsocket, Rhode Island, 02895, USA.
Dear
Customer,
To Next Page
Loading...
Need help?
General
