31
The display go in large digits panel if no key is pressed for about 4 minutes. If key is pressed, the display
returns in the panel where it was before.
Pressing ESC when in one of those panels will return in main panels mode.
MESSAGES
When warnings, alarms or errors appears, the message line is displayed. The meanings of each message
is explained in chapter ERRORS, ALARMS AND WARNINGS.
If many messages are present, the “<“and “>” signs are displayed on the left and/or the right side.
Pressing left or right arrow keys the messages are scrolled. If is no message in the left or right side,
the corresponding sign “<“ or “>” disappears.
When at least one alarm is active, the “Alarm” appears in the right side of the display. The ALARM
LED will start to blink.
When errors or both, errors and alarms are active, “Error” appears in the right side of the display.
The SYSTEM ERROR LED will blink.
The “MANUAL” or “STANDBY” information is displayed on the first line of the LCD.
MENU MODE
By pressing MENU key, the analyzer will enter in menu mode.
In this mode, the analyzer settings can be consulted or modified. The settings are organized in menus
and grouped by functions.
The menu is password protected.
PASSWORD PROCEDURE
When the MENU key is pressed, the analyzer ask for the password.
If the password is set to “0000” (default value) the analyzer will not ask for password.
USER INTERFACE
To Next Page
Loading...
Need help?
General
