ANALYZER SERIAL NUMBER AND SOFTWARE VERSION
The unique serial number can be viewed by selecting the “General Menu” - “System Functions” -
“Serial Nr.”.
Serial number is not editable.
The software version is displayed each time the analyzer is turned on and lasts during the initialization
phase.
TIME AND DATE
The PCA310 - PCA340 analyzers have a built in real time clock. When the analyzer is in normal mode,
the current time is displayed on the right side of the display in HH:MM format.
To set the time and date, select the “General Menu” - “Time and Date”. Set the time and the date
as described in the User interface chapter.
Set Time: 10:31
Set Date:2004/01/01
CHANGING THE PASSWORD
The password is a numeric value with 4 digits.
To change the password, enter in “General Menu” - “System Functions” and edit the “Change Pass”
line. Press CFM to save.
After new value is confirmed, the displayed password is set to 0000 for protection against unauthorized
reading.
SETTING THE LANGUAGE
The PCA310 - PCA340 analyzers has 4 languages stored inside. The user could easily change the
language without restarting the analyzer.
To select a new language, enter in “General Menu” - “Language Change” and select the new language.
After pressing CFM key, the new language is loaded.
GENERAL SETTINGS
36
To Next Page
Loading...
Need help?
General
