Scheduler Settings
35
AMX RoomBook Scheduling Touch Panels - Instruction Manual
Scheduler Settings
Overview
Most of the settings made in the Scheduling Panel Setup Wizard (see page 22) can be viewed and edited via the Scheduler Settings
options, as described below.
NOTE: Refer to the Advanced Settings section on page 42 for information on viewing/edit touch panel-specific options.
Accessing the Scheduler Settings Pages
1. Press and hold the pushbutton on the top of the touch panel for 5 seconds to invoke the SETTINGS window (FIG. 49):
NOTE: Alternatively, press and hold the room name for approximately 5 seconds to open the Settings window.
2. Press SCHEDULER SETTINGS. These settings are password-protected. Enter the Administrator password for the scheduling
system in the ENTER PASSWORD field (FIG. 50):
The default password is 1988.
This password is configured in the Security page of the Setup Wizard - see Setup Wizard: Step 7 - SECURITY on page 33.
3. Press Submit. If the password entered was valid, the SETTINGS pages are opened (FIG. 51):
The SETTINGS pages provide the ability to view/edit the Scheduler Settings on this panel.
Note that these pages are presented in a similar fashion to the pages in the Scheduling Panel Setup Wizard - the initial
Settings page presented is the Network Settings page (shown in FIG. 51).
FIG. 49
SETTINGS window - SCHEDULER SETTINGS
FIG. 50 Administrator Login window
FIG. 51 SETTINGS Pages (Network Settings page shown)
Press to view/edit
scheduling system options
Press to access the Settings pages
The button for the currently selected Settings page is highlighted
Press to edit the current settings
To Next Page
Loading...