Harman RMBK-1001 - DEVICE - Display; Adjusting Panel Brightness

Advanced Settings
46
AMX RoomBook Scheduling Touch Panels - Instruction Manual
To return to the Sound page without making any changes, press Cancel (or press outside the Default Notification Sound window).
DEVICE - Display
The Display page (FIG. 75) controls the basic functions of the panel display, including the panel brightness, display timeout settings
and touch calibration.
Adjusting Panel Brightness
1. In the Display page, select Brightness to open the Brightness window (FIG. 76).
2. Use the slidebar for manual adjustment of the panel’s display brightness.
FIG. 74
Default Notification Sound window
FIG. 75 DEVICE - Display page
DEVICE - Display page options
Brightness: Sets the display brightness and contrast levels of the panel. See Adjusting Panel Brightness on page 46 for details.
Display Timeout: Indicates the length of time that the panel can remain idle before the display automatically powers down.
Select the Display Timeout setting. Range = 30 seconds, 1, 5, 10, 30 minutes, 1, 2, 4 and 8 hours. The default setting
is 8 hours. Set the timeout value to None to disable Display Timeout mode.
See the Adjusting Display Timeout on page 47 for details.
Calibration Test: Select this to open the Calibration Test page. See Calibration Test on page 47 for details.
Calibrate: Select to open the Calibrate window, t
o manually calibrate the panel. See Calibrate on page 48 for details.
Return icon - press to jump to the previous view