Scheduler Settings
36
AMX RoomBook Scheduling Touch Panels - Instruction Manual
4. Press any of the buttons along the top of the page to access each Settings page.
Viewing/Editing Network Settings
1. Press Network to view the current Network settings for this panel (FIG. 52):
2. Press Edit to open the NETWORK Settings page, to edit the current settings as required (FIG. 53).
3. Press on any enabled field and use the on-screen keyboard or keypad to edit these fields as necessary.
4. Press Next to jump to the next editable field on this page. The fields on the NETWORK Settings page are described on page 23.
NOTE: The example in FIG. 53 shows all fields enabled. This is because with "Static" selected, all network information must be
manually entered. When DHCP is selected, only the "Hostname" field is enabled for editing.
5. Press Proxy Setup to enable/disable the Proxy option and configure Proxy Settings and Account Information as required, in
the Proxy Settings page. By default Proxy is disabled on RMBK panels, Refer to the Proxy Setup section on page 37 for details.
6. Press Save to save changes and close the NETWORK Settings page.
NOTE: The panel’s Network settings can be also be edited via Advanced Settings (see CONNECTIONS - Ethernet on page 49).
Changing the IP Address on the Acendo Panel
Select either DHCP or Static at the top of the NETWORK Settings page.
Note that by default, DHCP is selected (and the remaining addressing options on this page are disabled).
If Static is selected, the fields on this page are enabled and must be filled in manually.
FIG. 52
SETTINGS Page - Network
FIG. 53 NETWORK Settings page
Press to open the Proxy
Settings page
To Next Page
Loading...