Advanced Settings
47
AMX RoomBook Scheduling Touch Panels - Instruction Manual
3. Press OK to save changes and close this window.
To return to the Display page without making any changes, press Cancel (or press outside the Brightness window).
Adjusting Display Timeout
1. In the Display page, select Display Timeout to open the Display Timeout window (FIG. 77).
2. Select the time period that will pass before the panel enters sleep mode, or select None to keep the panel from shutting down
its display. The default settings is 8 hours. When a timeout setting is selected, the Display Timeout window closes immediately,
having applied the selected setting.
To return to the Display page without making any changes, press Cancel (or press outside the Display Timeout window).
Calibration Test
Acendo Book panels automatically self-calibrate on startup. The Calibration Test page may be used to verify the accuracy of that
calibration. Select Calibration Test to open the Calibration Test page (FIG. 78):
NOTE: In order to ensure a correct calibration upon starting, the panel display should not be touched while the panel is booting.
To run a calibration test on the touch panel:
1. In the Display page, select Calibration Test.
2. Touch the screen to test the calibration.
3. For options when testing the calibration of the touch panel, select Options to open the Calibration Test Options window
(FIG. 79).
Fade is the default setting: it causes the cursor to fade away after touching; press it again to retain all touches on the
display screen. Select this option to disable the Fade feature.
Press Clear to clear the memory of previous touches. When finished, select Exit to return to the Calibration Test page.
FIG. 76
Brightness window
FIG. 77 Display Timeout window
FIG. 78 Calibration Test menu
To Next Page
Loading...