Advanced Settings
58
AMX RoomBook Scheduling Touch Panels - Instruction Manual
Disabling and Enabling Trusted CA Certificates
System certificates that are currently enabled are indicated with a blue checkmark. Note that by default, all installed certificates are
enabled, as indicated in FIG. 104:
To disable a system certificate, press to select a system certificate. This invokes the Security certificate details dialog for the
selected certificate. An example is shown in FIG. 105:
To disable this system certificate, press the Disable button. The panel will prompt you to verify this action (press OK to proceed):
FIG. 107 shows an example of a disabled system certificate (FIG. 107):
FIG. 104
System CA Certificates list - indicating all security certificates are enabled
FIG. 105 Example Security certificate details dialog
FIG. 106 Disabling a System Certificate
FIG. 107 System CA Certificates list - indicating all security certificates are enabled
Enable/Disable security certificates
Disable this security certificate
Disabled security certificate
To Next Page
Loading...