Advanced Settings
61
AMX RoomBook Scheduling Touch Panels - Instruction Manual
To return to the Reset and Update page without making any changes, press Reset and Update.
2. To erase all data from the panel, press Reset Device.
NOTE: The Scheduling Panel Setup Wizard will be launched again if a Factory Data Reset is performed on the panel (see page 22).
Reset Settings
To reset the Settings values to their default values:
1. Under DEVICE RESET, press Reset Settings.
2. The panel will prompt you to verify this action (FIG. 114):.
3. Press Yes to proceed. To return to the Reset and Update page without saving any changes, press No.
NOTE: The Scheduling Panel Setup Wizard will be launched again if a Reset Settings is performed on the panel (see page 22).
Enable/Disable Web Services
This option enables/disables Web Services on this Acendo Book panel (FIG. 115): .
Web Services allow the Acendo Book panel to connect to the Update Manager server, to receive firmware updates from
www.amx.com. By default, this option is enabled (ON).
To disable Web Services on this panel, toggle this option to OFF.
Firmware Manager
Select Firmware Manager under UPDATE MANAGER in the Reset and Update page to access the Firmware Manager page (FIG. 116):
FIG. 113
Factory Data Reset window
FIG. 114 Reset Settings prompt window
FIG. 115 UPDATE MANAGER - Web Services option
FIG. 116 Firmware Manager page
To Next Page
Loading...