Harman RMBK-1001 - SYSTEM - Date & Time; Manually Setting a Custom NTP Server

Advanced Settings
51
AMX RoomBook Scheduling Touch Panels - Instruction Manual
SYSTEM - Date & Time
The Date & Time page (FIG. 85) allows setting and adjusting the NTP/time and date information on the panel.
NOTE: The network configuration must allow the Acendo Book Scheduling panel to communicate with the specified NTP Server
(default or custom) in order for RoomBook to function.
Manually Setting a Custom NTP Server
1. In the Date & Time page, press Set NTP Server. This opens the Set NTP Server window (FIG. 86):
To return to the Date & Time page without making any changes, press Cancel (or press outside the Set NTP Server window).
2. Select Custom to invoke the NTP Server window (FIG. 87):
3. Press Set NTP server to enter the IP address of the NTP Server to use (via the on-screen keyboard).
4. Press OK to save changes and close this window.
To return to the Date & Time page without making any changes, press Cancel (or press outside the NTP Server window).
FIG. 85
SYSTEM - Date & Time page
SYSTEM - Date & Time page options
Set NTP Server: Date and time information is retrieved from an NTP Server. A default public NTP server is pre-configured on the
panels. Press Set NTP Server option to manually specify a custom NTP Server (see below).
Select Time Zone: Use the Select Time Zone window (FIG. 88) to select the current time zone.
FIG. 86 Set NTP Server window
FIG. 87 NTP Server window
Return icon - press to jump to the previous view