Scheduler Settings
37
AMX RoomBook Scheduling Touch Panels - Instruction Manual
Proxy Setup
Press the Proxy Setup button on the NETWORK Settings page (see FIG. 53 on page 36) to access the Proxy Settings page (FIG. 54):
Use the options in the Proxy Settings page to enable/disable the Proxy option and configure Proxy Settings and Account
Information as required.
NOTE: By default Proxy is disabled on RMBK panels.
FIG. 54
Proxy Settings page
Proxy Settings page options
SERVICE CONTROLLER
Proxy Switch Push this button to enable or disable Proxy support on this panel. Note that by default, the Proxy Switch is
set to "OFF", indicating that proxy support is disabled. If this panel will connect to a proxy server, press this
button to toggle the Proxy Switch to "ON" (enabled).
Note that when the Proxy Switch is set to ON, the proxy configuration options on this page are disabled.
These options can only be set when the Proxy Switch is set to OFF.
PROXY SETTINGS
Auto Setting When enabled, this panel will automatically retrieve the proxy settings from a PAC (proxy auto-config) file
on the proxy server. To use this option, a valid PAC file must reside on the proxy server.
Press this option to enable using a PAC file for proxy settings. A blue checkmark in the Auto Setting option
indicates that this option is enabled. Note that when this option is enabled, the remaining PROXY SETTINGS
on this page are disabled, since manual entry is not needed.
Host Press to manually enter the Host (IP Address) of the proxy server.
Port Press to manually enter the Port number on the proxy server that will be used for this RMBK panel.
Proxy Type Press to select the Proxy Type used on the proxy server to which this RMBK panel will connect.
The options are HTTP/HTTPS (the default setting), SOCKS4 and SOCKS5.
ACCOUNT INFORMATION
Enable Authentication If this panel will connect to a secured proxy server (one that requires a Proxy Username and Proxy
Password in order to connect), press this option to enable the User and Password options described below.
Note that by default, the Enable Authentication option is set to "OFF".
A blue checkmark in the Enable Authentication option indicates that this option is enabled. Note that when
this option is enabled, the remaining ACCOUNT INFORMATION options on this page are enabled.
User If the Enable Authentication option is selected, press this option to enter the Proxy User name required by
the server.
Password If the Enable Authentication option is selected, press this option to enter the Proxy Password required by
the server.
NTLM Authentication If this panel will connect to a NTLM/NTLM2 secured proxy server (one that uses NT LAN Manager
authentication methods), press this option to enable the Domain option described below. Note that by
default, the NTLM Authentication option is set to "OFF".
Domain If the NTLM Authentication option is selected, press to enter the Domain name required for proxy server.
Scroll down
to see all
menu items
Return icon - press to close the Proxy Settings page
Press to enable/disable a
proxy connection on
this panel
To Next Page
Loading...