Harman RMBK-1001 - Configuring VNC Access; CONNECTIONS - Ethernet

Advanced Settings
49
AMX RoomBook Scheduling Touch Panels - Instruction Manual
Conf iguring VNC Access
In the VNC page, use the options under VNC SERVER to configure various aspects of VNC access on the panel:
Press Timeout to specify a timeout period for VNC connections, in the Timeout window. Press OK to save changes.
Press Password to assign the password to be required to establish a VNC connection, in the Password window. By default,
no VNC password is set. Press OK to save changes.
Press Port to specify the port to be used by the VNC Web Server, in the Port window. This option is not available if VNC is
currently enabled. Press OK to save changes.
Press Maximum Connections to set the maximum number of users that can be simultaneously connected to this panel via
VNC. Press OK to save changes.
CONNECTIONS - Ethernet
The Ethernet page (FIG. 81) controls the configuration of settings for Ethernet communication with the panel.
FIG. 81
CONNECTIONS - Ethernet page
CONNECTIONS - Ethernet page options
DHCP/Static: Sets the panel to either DHCP or Static communication modes.
• DHCP is an IP Address assigned to the panel by a DHCP server. If DHCP is selected, the other Network Connection
fields are disabled (see below).
• Static IP is a permanent IP Address assigned to the panel. If Static IP is selected, the other Network Connection fields
are enabled.
IP Address: Displays the IP address for this panel. If DHCP is enabled, this field will be disabled.
Subnet Mask: Displays the subnetwork for this panel. If DHCP is enabled, this field will be disabled.
Gateway: Displays the gateway address for this panel. If DHCP is enabled, this field will be disabled.
Hostname: Displays the hostname for this panel.
Domain: Displays a name to the panel for DNS look-up. If DHCP is enabled, this field will be disabled.
Primary DNS: Displays the address of the primary DNS server used by this panel for host name lookups. If DHCP is enabled, this field
will be disabled.
Secondary DNS: Displays the secondary DNS address for this panel. If DHCP is enabled, this field will be disabled.
MAC Address: This unique address identifies the Ethernet connection in the panel (read-only).
Return icon - press to jump to the previous view