Harman RMBK-1001 - Reverting to Factory-Installed Firmware; Installing New Firmware from an External USB Stick

Advanced Settings
62
AMX RoomBook Scheduling Touch Panels - Instruction Manual
Reverting to Factory-Installed Firmware
In certain circumstances, it may be necessary to uninstall the current firmware on a panel and return it to the original factory
default firmware. To reset the panel to its original factory firmware:
1. From the Firmware Manager window, select UPDATE next to Revert to Factory Firmware (FIG. 117):
2. A System Message window is displayed that indicates the factory firmware version that will be installed, and prompting you to
verify this action (FIG. 118):
3. Select OK to install the previous firmware version and Cancel to return to the Firmware Manager.
4. If you choose OK, the panel will reboot and restart with the factory installed firmware.
NOTE: Resetting the panel to its original factory firmware will remove all updates made to the Settings menu since that version.
Installing New Firmware From An External USB Stick
To install new firmware to the panel from a USB stick:
1. Download the latest Acendo Book panel firmware from www.amx.com and save it to a USB stick or other external drive with
USB capability.
NOTE: The firmware can be saved at the root directory, or be saved in a folder in the USB stick directory.The folder name is not
case sensitive.
2. Insert the USB stick into an available USB port. This may require disassembling wall-mounted panels to access the USB ports
if a USB extension was not already installed.
3. From the Firmware Manager window (FIG. 116 on page 61), select UPDATE next to Install Firmware from USB (FIG. 119):
4. The KIT File Browser window presents a listing of firmware available on the USB stick (FIG. 120):
5. Select the KIT f ile to be installed.
6. The panel will prompt you to verify this action. Press OK to proceed (FIG. 121): .
FIG. 117
Firmware Manager - Revert To Factory Firmware
FIG. 118 System Prompt - Revert To Factory Firmware?
FIG. 119 Firmware Manager - Install Firmware from USB
FIG. 120 KIT File Browser window
FIG. 121 Verify Firmware Installation