Advanced Settings
60
AMX RoomBook Scheduling Touch Panels - Instruction Manual
3. Press OK to proceed (or press Cancel to return to the Security page without clearing credentials.
SYSTEM - Reset and Update
The Reset and Update page (FIG. 112) allows resetting and updating of panel settings and firmware, including installation of new
firmware from an external drive.
Factory Data Reset
To reset the panel to its factory defaults and remove all data stored in the panel (including user pages):
1. Under DEVICE RESET, press Factory Data Reset to open the Factory Data Reset window (FIG. 113).
FIG. 111
Verify Clearing Credentials from this panel
FIG. 112 Reset and Update page
Reset and Update page options
DEVICE RESET
Factory Data Reset Erases all data on the panel and resets the panel back to it’s factory default settings.
See Factory Data Reset on page 60 for details.
Reset Settings Select to revert the panel back to its default settings, but does not erase all data from the panel. Note that the
panel will be rebooted.
See Reset Settings on page 61 for details.
UPDATE MANAGER
Web Services Use this switch to toggle Update Manager Web Services on the panel: If this switch is on, the Update Manager
will attempt to connect to the Update Manager Server (hosted on amx.com). If the switch is off, then the
Update Manager will not attempt to connect to the Update Manager Server.
Firmware Manager Select to open the Firmware Manager page. Use the options on this page to update the firmware on the panel.
See the Firmware Manager section on page 61 for details.
Return icon - press to close the Advanced Settings menu
To Next Page
Loading...