Advanced Settings
59
AMX RoomBook Scheduling Touch Panels - Instruction Manual
NOTE: Disabled system certif icates can be enabled later; disabled system certif icates are not cleared from the panel (see the Clearing
Credentials section on page 59).
To enable a system certificate, select a disabled system certificate. This invokes the Security certificate details dialog for the
selected certificate. An example is shown in FIG. 105:
To enable this system certificate, press the Enable button. The panel will prompt you to verify this action (press OK to proceed):
Installing Certificates
System certificates can be installed to the panel via USB, using the Install From Storage option on the Security Settings page.
System certificates can be used with Microsoft Exchange and Office 365 Calendar setups (see FIG. 25 on page 24).
Supported certificate file extensions are: *.crt, *.pem and *.der.
1. Insert an external USB storage device into the USB port on the Acendo Book panel.
NOTE: The USB port extends from the bottom of the panel (see FIG. 19 on page 20 and FIG. 20 on page 21).
2. In the Security page, under CREDENTIAL STORAGE (see FIG. 100 on page 56), press Install From Storage to invoke the
Certificate File Browser page (FIG. 110):
Clearing Credentials
To clear all security credentials (CA certificates) from this Acendo Panel:
1. In the Security page, press Clear Credentials.
2. The panel will prompt you to verify this action (FIG. 111):
FIG. 108
Example Security certificate details dialog (for a disabled system certificate)
FIG. 109 Enabling a System Certificate
FIG. 110 Certificate File Browser page
Enable this security certificate
To Next Page
Loading...