Configuring your Mailing System
134
9
GEO Code
The Weighing Platform (option) provide mail piece weights that have to be corrected
according to the geographical location of the mailing system, as weights can change
with altitude and latitude. The correcting geodesic code may be entered:
• Automatically with Online Services
• Manually
To change the GEO code manually, follow the steps below.
How to Change the GEO Code
How to Change
the GEO Code
To change the GEO code:
1 As supervisor (see
How to Log in as Supervisor
p.124 ):
2 See the map and table on the next pages to get the 5 digit
GEO code from your location altitude and latitude, and enter
the 5 digit using the keypad.
3 Press [OK] to validate.
Changing the GEO code modifies the weight values the mailing
system delivers. Make sure you enter the correct parameter.
Press and type 6.2 or select the path:
> System settings > GEO code
ALPHA1_US.book Page 134 Mardi, 3. mai 2011 2:23 14
To Next Page
Loading...
