Configuring your Mailing System
137
9
Imprint Default Settings
The settings of the imprint 'by default' (applied to all user sessions) include:
• Imprint default settings : default rate, text and ad slogan
• Fractional mode : enables fractional values for manually entered postage
• Automatic Date Advance : enables early date change to allow mail processing with
a new printed date after post office closing hours.
Imprint Default Settings
You can set default parameters for the imprint elements that follow:
• Rate
• Text
• Ad slogan
You can create up to nine custom text messages.
On list screens, a mark indicates the default parameter.
How to Change the Default Rate
How to Change
the Default Rate
To change the default rate:
1 As supervisor (see
How to Log in as Supervisor
p.124 ):
2 The following message is displayed :
To default a rate, press
[OK] .
Press [OK] to accept.
3 Select the default rate using the rate wizard.
4 Press [OK] to validate.
See also
Managing Postal Rates
p.160
9.9 Imprint Default Settings
Press and type 3.3.3 or select the path:
> Default user settings > Default imprint parameters >
Default rate
ALPHA1_US.book Page 137 Mardi, 3. mai 2011 2:23 14
To Next Page
Loading...
