Hasler im-280 - How to Display the Error Lists; How to Display the Machine Counters

Troubleshooting
182
12
How to Display the Error Lists
How to Display
the Error Lists
To display the error lists:
1 As supervisor (see How to Log in as Supervisor p.124 ):
2 Select the > Base errors list (or type 1 ) or the > PSD errors
list (or type
2 ) or Server connection history (or type 3 )
3 Press [OK] to validate.
4 Select an output : Screen, USB printer, USB key, then press
[OK] .
5 The system displays the selected list in a table with, for each
error:
- The
Code of the error
- The
Date where appends the error
- The
Cycles count when the error occurred.
- The
Description
- The
Category
6 Note the Code and refer to your customer service.
How to Display the Machine Counters
How to Display
the Machine
Counters
To display the data of the system counters:
1 As supervisor (see How to Log in as Supervisor p.124 ):
2 The system displays the data of the system counters.
Press and type 7.1.3 or select the path:
> Maintenance > System info > Error list
Press and type 7.1.4 or select the path:
> Maintenance > System info > Counters
ALPHA1_US.book Page 182 Mardi, 3. mai 2011 2:23 14