Processing Mail
26
3
Parameters of the Type of Imprint
The table below indicates the type of imprint to choose, depending on the type of
process you want to apply to each set of mail.
The column on the right indicates, for each type of imprint, the parameters you can
set before printing mail.
The mailing system uses default values defined as supervisor.
See also
• To set default values as supervisor: see
Configuring your Mailing System
p.121 .
Type of process
Type of imprint
Parameters
Apply postage to outgoing
mail
[Standard ]
• Rate
• Weight
• Date format
• Slogan (optional)
• Text (optional)
Re-date a mail piece [Correction date ]
• No weight, postage amount
= 0
• Date format
Correct the amount on a
mail piece (print on back of
envelope)
[Amount correction
]
•
Manual amount of postage
• Date format
Print 'Received' and/or the
date on incoming mail
[Received ]
•
Printing date and/or 'Slogan
Received ' .
By default, the system selects the [Standard ] type of imprint at
start-up.
ALPHA1_US.book Page 26 Mardi, 3. mai 2011 2:23 14
To Next Page
Loading...
