PC Comms - GosHawkII
Sultan Acoustic Wave Series
40
HAWK provides free in-house developed software called GosHawkII. This software is supported by all current
products and is used by HAWK Engineers & HAWK authorised representatives during commissioning, testing
and monitoring unit performance.
The software allows easy access to unit setup menus using a PC rather than the keypad and gives a visual
representation of what the unit is seeing (all echoes which pass the unit filter), transmitting and displaying on
the unit face.
The best and easiest way to set up, troubleshoot and monitor a HAWK unit is via GosHawkII.
To connect to a unit using this software you need either a HawkLink modem or HawkLink USB connector.
For a multidrop network GosHawkII uses a Modbus ID to identify each unit.