Model overview, scope of supply, accessories
PMX A4354-2.2 HBM: public 35
Spare parts Order No.
PX01, PMX blue blanking plate for plug‐in card slot 0 1-PX01
PX02, PMX gray blanking plate for plug‐in card slot 1-4 1-PX02
RAILCLIP, PMX DIN rail mounting set (2 pieces), incl. screws 1-RAILCLIP
Phoenix plug terminals
Set of plug terminals (push‐in) for PMX plug‐in cards (4 x
7‐pin, incl. coding plug and labeling sheets)
Set of screw terminals for PMX plug‐in cards
(4 x 7‐pin, incl. coding plug and labeling sheets)
Set of screw terminal for PMX voltage supply
(1 x 2‐pin, incl. coding plug and labeling sheets)
Set of plug terminals (push‐in) for PMX plug‐in cards (2 x
13‐pin and 2 x 2‐pin, incl. coding plug and labeling sheets)
Mating connector M12x1 for CAN interface for WGX001
1-CON-S1008
1-CON-S1009
1-CON-S1010
1-CON-S1012
1-CON-S1002
In general, the mating connectors are always included for
all plug-in cards (PX401, PX455, PX460 and PX878).
When ordering a PMX basic device, the delivery always
includes DIN rail mounting and wall mounting elements.
Important
You have the option to retrofit or subsequently remove
measurement cards, I/O cards and communication cards.
To Next Page