HBM PX455 - System Log Entries for System Status

Diagnosis and maintenance
528 A4354-2.2 HBM: public PMX
24.8.1 System log entries for system status
S SyncMaster or –Slave:
No sync input. Switching to master mode.
Sync available. Switching to slave mode.
S Sync error
Too many CRC errors on sync input
Temporarily switching to master mode
S Sync regulator error
Cannot lock to incoming sync signal
S Sensor power output overload:
System status SensorPowerOutputOverload has
been "activated"
System status SensorPowerOutputOverload has
been "deactivated"
S Command interface buffer overflow:
System status Commandinterfacebufferoverflow
has been "activated"
System status Commandinterfacebufferoverflow
has been "deactivated"
S Calculated channels CPU overflow
Calculated channels runtime over