HBM PX455 - Px460

Electrical connections PMX
PMX A4354-2.2 HBM: public 87
8.4.4 PX460
Torque flanges (torque, speed, angle of rotation),
angle/incremental encoders, SSI/PWM sensors and
frequency measurements up to 2 MHz
Channels 1 and 3: Frequency measurement (fixed)
Channels 2 and 4: Frequency (digital/inductive), counter,
encoder, SSI, PWM (adjustable)
The following measurement modes are available:
- Up to four torque flanges (T10, T12, T40) for torque
or speed measurement (without direction of rotation
detection)
- Or two torque flanges for simultaneous torque and
rotational speed measurement (without direction of
rotation/angle of rotation measurement)
- Or one torque flange for simultaneous
measurement of torque, speed, angle and direction
of rotation or reference pulse detection
- Or two angle/incremental encoders each, SSI/PWM
sensors, magnetic transducers or pulse counters
- Or four torque flanges for frequency measurement
up to 2 MHz, incl. two shunt calibrations and two
1-Wire TEDS (sensor detection)